2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 967
* Brake Pressure Modulator Valve Replacement (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Hydraulic
Control Assembly - Antilock Brakes/Service and Repair)
* Control Module References (See: Testing and Inspection/Programming and Relearning) for EBCM replacement, setup, and programming
C120F
DTC C0880, C12E5, or C120F
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptors
DTC C0880 00
- Device Voltage Reference Output Circuit
DTC C12E5 00
- Brake Pedal Position Sensor Reference Circuit
DTC C0880 02
- Device Voltage Reference Output Circuit Short to Ground
DTC C120F 00
- Device Voltage Reference Output Circuit Short to Ground
Diagnostic Fault Information
Circuit/System Description
The electronic brake control module (EBCM) supplies a shared 5 volt reference to the brake master cylinder piston position sensor, steering angle
sensor and brake master cylinder piston position sensor.
Conditions for Running the DTC
* Ignition ON.
* The ignition voltage is greater than 10 volts.
Conditions for Setting the DTC
The EBCM detects the voltage on the 5 V reference circuit to the brake master cylinder piston position sensor, steering angle sensor and brake
master cylinder piston position sensor is less than 4.8 V or greater than 5.2 V.
Action Taken When the DTC Sets
* The EBCM disables the antilock brake system (ABS), traction control and the vehicle stability enhancement system for the duration of the
FORD Diagnostic and Repair Information ,Wiring Diagrams. DTC. TSB. Types: TSB, DTC, Wiring Diagrams, OEM Procedures. Trusted by more than 400,000 technicians. OEM accurate fix for faster repairs. Repair Procedures and Labor Times. Factory Auto Repair info. Request A Demo Today. Factory-Correct Diagrams. Factory Part Numbers. Maintenance Schedules. Repair Procedures. Labor Times. Types: TSB, DTC.